Snap-In Vinyl and Thermoplastic Door Bottoms for Metal or Wood Doors

Made to be exact replacements for the worn bottom weatherstrip of popular brands. Easy to install and the multiple seals provide extra weathersealing.

Where to buy

PRODUCT	SKU	UPC	SPECS	COLOR
Snap-in Vinyl Door Bottoms for Metal Doors	UDS36	077578052434	1-3/4" x 36"L, for Stanley Doors	Brown
Thermoplastic Door Bottoms	UDB36BR	077578044026	1-3/4" x 36"L, Screw on	Brown
	UDX36	077578059211	1-3/4" x 36"L, Nail or Glue on	Brown
	UDB77	077578059754	1-3/4 " x 36 " L,幻灯片	Brown
	UDB77W	077578061818	1-3/4 " x 36 " L,幻灯片	White
	EZ77CL	077578062501	1-3/4 " x 36 " L,幻灯片	Clear

Popular FAQ's

Q: Can the Double Draft Stop be cut to fit a smaller door or window?

Yes. The foam tubes inside theDouble Draft Stopcan be cut to any size. Once the tubes are back in the case, the loose ends can be folded over to accommodate narrower doors and smaller windows.

Q: Will The Double Draft Stop also keep bugs from crawling under the door?

TheDouble Draft Stopis not rigid enough to prevent all bugs from crawling under the door. A better solution in this situation would be anAluminum and Vinyl Door Sweepthat attaches to the bottom inside of the door.

Popular FAQ's

Q: What is the length of the fins on the PVC Door Bottom Replacement for Stanley Steel Doors?

The fins on the1 in. x 36 in. Brown PVC Door Bottom Replacement for Stanley Steel Doorswill cover up to a 1/2" gap under the door.

Q: How do I install my Door Sweep?

Sweeps are fairly simple to install, take a look at thethreshold video, or download theinstructions.

Popular FAQ's

Q: Do Door Sweeps go on the inside or the outside of the door?

A majority of Door Sweeps should be installed on the inside of the door, since most entry doors are "in-swinging" doors. A door sweep attached to the outside of the door would be only be used for an "out-swinging" door. A good rule of thumb: you don't want the door sweep to cross the threshold when the door is in motion.

Q: What size drill bit do I use on door sweeps?

Use 1/8 inch drill bits.

Popular FAQ's

Q: What can I do to make sure the Vinyl Inset Fits Correctly?

First, soak the Vinyl Insert in a tub of warm (but not hot) water, with just a drop of liquid soap, for about 10-15 minutes. This will make the Vinyl Insert more pliable and easier to work into the threshold grooves. Once the Insert is warmed up, it should be pliable enough to slide into thethreshold groovewith no problem. If the insert is just being stubborn, a plastic putty knife or plastic spatula can help guide the insert into the grooves for a snug fit.

Q: How do I install my new Threshold.

It's Easy. Take a look at the instructions here...threshold label instructionOr you can watch the Handy Guys install a new Threshold,here.

Popular FAQ's

Q: Does the 1 in. x 7 ft. Vinyl Clad Foam Kerf Door Seal install on the jamb or the door itself?

TheReplacement Door Seal for Kerfed Mill Doors, is a replacement for the Kerf seal that should already be in the door jamb or if it is missing there should be a kerf cut into the existing door jamb to accept this product.